Uses in the Sawdust Charcoal Making Machine

Sawdust, also known as wood shavings, is easily the most common by-product or waste product of woodworking operations mainly sanding, milling, sawing, planing, and routing. However, through proper recycling, the value of this waste material can be increased significantly. Among the finest ways to do this is by turning sawdust into sawdust charcoal. This is when the sawdust charcoal machine can be purchased in. This piece of equipment makes sawdust charcoal through carbonization or heating the sawdust under high temperatures within an oxygen-free atmosphere. Despite the term “sawdust” within the name, this device enables you to process all sorts of biomass including coconut shells, palm shells, rice husks, and also sewage sludge and municipal solid waste.

Besides sawdust charcoal, the process also leads to the production of other useful by-products like biogas, tar, and vinegar as we’ll see at a later time. Some great benefits of choosing a sawdust charcoal making machine can’t be overlooked. There is a lot to achieve using this piece of equipment. However, in case you are considering making an investment in this machine, you may well be wondering just how will it work and what are one of the applications of its end products. Well, this article aims at answering simply that.

The Sawdust Charcoal Making Process

The entire process of making charcoal from sawdust typically takes 15–20 minutes. First, it is very important note that the raw materials fed in to the machine needs to be less than 50mm and should contain less than 20% moisture. So, a special shredder is employed to crush the sawdust or other kinds of biomass in order to meet this requirement. These materials are then sent in to the drying system through the quantitative feeder. View the sawdust charcoal making process.

As soon as the drying process is done, the dry sawdust moves into the carbonization furnace. When the temperature reaches about 350 degrees celsius the sawdust charcoal is generated and brought to the air conditioning where this will make it discharged.

Keep in mind that through the entire carbonization process, the production of combustible gas is going to be happening. This gas will likely be passed through the cyclone dust remover and spray washer to clean then it moves on the condenser. The condenser is mainly responsible for separating and collecting wood vinegar and tar.

The combustible gas is going to be shipped to the carbonization reactor where it is actually useful for heating purposes.

Applications of the End Products of the Sawdust Charcoal Machine

i) Sawdust charcoal

The charcoal produced is traditionally used in day to day life as fuel for BBQ, cooking, and heating. It is also widely used in industries like a source of fuel. In agriculture, the sawdust charcoal is commonly used to enhance soil quality with the long term adsorption of heavy metal pollutants. The charcoal can also be used in making clay construction bricks.

ii) Biogas

The uses of biogas are pretty much popular. From getting used as being a fuel for cooking, greenhouse agriculture heating, to electricity generation. Additionally it is used inside the sawdust charcoal making equipment for heating and drying purposes.

iii) Tar and Wood Vinegar

These kinds of products are commonly used as raw materials for chemicals and medicinal products. They are also found in the paint and shipbuilding industries.